Connection Form

MainPower requires the Connection Application Form provided below to be filled in by an electrician, builder or customer as appropriate in all instances where a connection to the distribution system is required in order to deliver electricity to a consumer.

The form can be filled in online and submitted with electronically attached plans however if you prefer to print the form out, fill it in and fax or deliver it with attached plans then click here for a printable version.

Electricians-please review this information relating to important requirements when applying for connections to our distribution system which should provide some assistance with the connection process. MainPower looks forward to assessing your application and connecting you to our distribution system.

Note: Where fields are not applicable, please put N/A. Form will not submit with blank fields.

Customer/Builder Name Enquiries Ph 03-311-8300

First Name/Builder :	Surname :
Postal Address :
Phone :	Mobile :

Connection Location

Rapid/St Number: Street Name:
Area :
Survey Plan	Lot:	DP :
Main Power Job Number(if known) :		Closest Transformer Number :

Electrician Details

First Name :	Surname :
Address:
Mobile :

A. Connection Type

Connection Type

New
Builder's Temporary
Change from Temporary to Permanent
Alteration to Existing Connection
Other — please enquire by phone before proceding

Proposed Connection Date

Date(dd/mm/yyyy) :

ICP 0000

B. Builders Temp Supply	C. Servicemain Details
Type: Metered Location at: Boundary Meter Box	Servicemain installed by : MainPower Electrician Other (specify) Specify:
(If not installed by MainPower, a detailed service cable plan is required — including offsets of any cables in the road reserve). Without a detailed cable plan the connection will not proceed.
Connection Charge : Customer / Builder Electrician	Service Main: Size : mm² Length : m Type : Cu Al
Monthly Supply Charge : Customer / Builder Electrician	D. Chosen Retailer Customer's Selection :

Connection of a temporary supply does not constitute approval for a final connection. A separate application must be submitted for a final supply connection.

Electrician to Complete

Compliance Certificate Number :		Proposed Generation : kW
Location of Compliance Certificate on Site :		Installation Description House Shed Pump Business	Water Heater Type Solar Controlled Uncontrolled Gas None
Maximum Demand : Amps/phase Phases for connection : 1 phase 3 phase		Installation Description House Shed Pump Business	Water Heater Type Solar Controlled Uncontrolled Gas None
Irrigation	Total Capacity: kW VFD Capacity :	F. Permanently Unmetered Supply
Largest Motor	Details : 1 phase 3 phase Capacity : kW Starting Method :	Description :	Connected Watts : W Daily Operating : hrs

Links referenced

here: http://www.mainpower.co.nz/index.cfm/3,369,516/appforconnection1210.pdf
this information: http://www.mainpower.co.nz/index.cfm/3,369,516/webeletricianreminders.pdf

Location http://www.mainpower.co.nz/index.cfm/1,369,516,-1,html

Connection Form

Connection Form

The form can be filled in online and submitted with electronically attached plans however if you prefer to print the form out, fill it in and fax or deliver it with attached plans then click here for a printable version.

Note: Where fields are not applicable, please put N/A. Form will not submit with blank fields.

Customer/Builder Name Enquiries Ph 03-311-8300

Connection Location

Survey Plan

Electrician Details

A. Connection Type

Connection Type

Proposed Connection Date

ICP 0000

B. Builders Temp Supply

C. Servicemain Details

D. Chosen Retailer

Electrician to Complete

F. Permanently Unmetered Supply

Links referenced